- SNÖSKOTER
- CROSS
- MOPED
- ATV
- MOTORCYKEL
- SKOG & TRÄDGÅRD
- BÅT & VATTENSPORT
- PERSONLIG UTRUSTNING
- ÖVRIGT
- UTFÖRSÄLJNING
- VARUMÄRKEN
- GUIDER
Välj underkategori
Hastighetsmätare rund 50mm
132-500285
Husqvarna
Corona & Cornette
D-motor (Äggmotor)
E-motor (Flinta)
Novolette
Roulette
MCB (Monark & Crescent)
1209
Topper/Trapper/50S & 50SS
Standard & Sport (Stockholmarna)
Bruksmopeder
Compact & Golden Champ
E-Type/SM50 & F50
Jetlinjen (Raketerna)
Monarpeder -1962 (Monark)
Saxopeder -1960 (Crescent)
Skotermopeder
Låghjulingar
Minimopeder
Piaggio
Ciao
Tomos
Alla modeller
442/444
446/447/460
Effektavgassystem Tomos A35/Quadro Mfl
17-005-11
Passar std. cylinder. Med expansionskammare.
TOMOS
A35
Quadro
WizzÉrd
TWS 2000
Förgasare Dellorto 12 mm
17-013-03
Rieju
Alla utan separat oljesmörjning
Tomos
A35
Quadro
Wizz`rd
TWS 2000
Universal
Tanklock låsbart
17-524-10
Puch
De flesta modeller
Sachs
MCB Compact
Zündapp
Bakdrev
17-550-28-H
Avdragare M26 x 1,5 mm ut.gänga
17-990-05
Avgassystem Universal 28mm race
355-502338
Avgassystem universal 28Mm Race KromLjuddämpare Jamarcol Kromad 28 mm
(28 mm röranslutning går in i denna)
Passar många olika gamla mopeder.
Detta är ett trimsystem från Jamarcol
Totallängd ca 680 mm
UniversalAvgassystem Tomos
355-502376
Avgassystem Tomos A3/35 Std.Model 22 mm
Trim. Typ original. Passar std. cylinder. Jamarcol.
TOMOSA3
A35
Wizzard
TWS 2000
Flexer -2005
Rengöring Bensintank 250ml
355-502576
Rengöring Bensintank 250ml
Instruktioner på engelska:
1. First derust the tank with Rust-Arrestor.
Plastic tanks only rinse with nitro.
Fill the heavily rusted and dry petrol tank with Rust-Arrestor and shake it,
placing the tank in a different position every time so that the Rust-Arrestor
remains in place for at least 2 hours.
This takes you through the entire tank.
Fill Rust-Arrestor back into the original container, the remaining amount can be
used to remove rust from other parts. Curing time is a minimum of 24 hours.
2. After the aforementioned curing time, swing out the tank well with nitro and empty out
the remaining amount. Let it dry well! Fill the tank with EC tank sealer,
swing it out and empty out the remaining amount, after 4-6 hours fill it again
with EC tank sealer and swing it out, empty the remaining amount again.
Curing time in the tank 3-4 days.
The tank can now be filled with any commercially available petrol or diesel.
Tips
In order not to damage the tank, you can wrap it with household foil.
If you cannot remove the fuel tap, you should blow it through immediately after sealing
it. Don't use the original cap, but cover it with adhesive tape.
If there is a hard black cut in the tank, you can scratch it with a screwdriver or sharp
point and soak it for a long time with Rust-Arrestor, then rinse it with high-pressure
water.