BRÄNSLESYSTEM

Bensinkran M16X1 Kvalité rak

Husqvarna
Corona & Cornette
Roulette

MCB (Monark & Crescent)
Topper/Trapper/50S & 50SS

Tomos
GT

Svamp Tanklock, Gul

Suzuki
K50

Tomos
GT

Svamp Tanklock, Grå

Suzuki
K50

Tomos
GT

Bensinkran kvalitet gammal modell gänga M16X1

Husqvarna
Modeller med 16mm gänga

Kreidler

DBS
Safir
Panter

MCB
Topper 
50ss

Crescent
Monark

Mustang
Cross Special
TT
617S
618S

Puch
Alla mopedmodeller förutom Puch maxi & magnum
125
150
175
200

Honda
CB125S
X
Endurance
OBS! kolla så att du kan ha rak anslutning, normalt sitter anslutningen bakåt på dessa modeller

KTM
Simpson

Sachs
Diverse modeller

Tomos
GT
Diverse modeller

Zündapp
Elastic 200
Elastic 250
Modeller med rak M16x1 mm anslutning

Rengöring Bensintank 250ml

Instruktioner på engelska:

1. First derust the tank with Rust-Arrestor.
Plastic tanks only rinse with nitro.
Fill the heavily rusted and dry petrol tank with Rust-Arrestor and shake it,
placing the tank in a different position every time so that the Rust-Arrestor
remains in place for at least 2 hours.
This takes you through the entire tank.
Fill Rust-Arrestor back into the original container, the remaining amount can be
used to remove rust from other parts. Curing time is a minimum of 24 hours.

2. After the aforementioned curing time, swing out the tank well with nitro and empty out
the remaining amount. Let it dry well! Fill the tank with EC tank sealer,
swing it out and empty out the remaining amount, after 4-6 hours fill it again
with EC tank sealer and swing it out, empty the remaining amount again.
Curing time in the tank 3-4 days.
The tank can now be filled with any commercially available petrol or diesel.

Tips
In order not to damage the tank, you can wrap it with household foil.
If you cannot remove the fuel tap, you should blow it through immediately after sealing
it. Don't use the original cap, but cover it with adhesive tape.
If there is a hard black cut in the tank, you can scratch it with a screwdriver or sharp
point and soak it for a long time with Rust-Arrestor, then rinse it with high-pressure
water.