BRÄNSLESYSTEM

Tanklock Puch / Tomos / MCB / Honda C50 / Camino / etc

MCB Compact

Crescent
( modellen med bajonettfattning) Flakmoped crescent 1189 mfl

Mustang 617
Mustang 618
Mustang Rocket & Rocket Special
Mustang Cross Special

Mustang Mamba

Puch Magnum

Tomos diverse modeller

30 mm

TOMOS
A3
Flexer XL

Tanklock med lås Tomos

TOMOS
A3
Colibri
Flexer XL
A35 Quadro

Bränslekran Tomos

Tanklock med lås

Tomos
Flexer
Pack´R
Funtastic

Tanklock Tomos

Tomos
Flexer
Funtastic
Pack´R

Tanklock låsbart MCB / Tomos / Puch

MCB Compact

Crescent
( modellen med bajonettfattning) Flakmoped crescent 1189 mfl

Mustang 617
Mustang 618
Mustang Rocket & Rocket Special
Mustang Cross Special

Puch Magnum

Tomos
Flexer XL
A35 Quadro

Tanklock Tomos

Tomos
Flexer XL
Funtastic

Rengöring Bensintank 250ml

Instruktioner på engelska:

1. First derust the tank with Rust-Arrestor.
Plastic tanks only rinse with nitro.
Fill the heavily rusted and dry petrol tank with Rust-Arrestor and shake it,
placing the tank in a different position every time so that the Rust-Arrestor
remains in place for at least 2 hours.
This takes you through the entire tank.
Fill Rust-Arrestor back into the original container, the remaining amount can be
used to remove rust from other parts. Curing time is a minimum of 24 hours.

2. After the aforementioned curing time, swing out the tank well with nitro and empty out
the remaining amount. Let it dry well! Fill the tank with EC tank sealer,
swing it out and empty out the remaining amount, after 4-6 hours fill it again
with EC tank sealer and swing it out, empty the remaining amount again.
Curing time in the tank 3-4 days.
The tank can now be filled with any commercially available petrol or diesel.

Tips
In order not to damage the tank, you can wrap it with household foil.
If you cannot remove the fuel tap, you should blow it through immediately after sealing
it. Don't use the original cap, but cover it with adhesive tape.
If there is a hard black cut in the tank, you can scratch it with a screwdriver or sharp
point and soak it for a long time with Rust-Arrestor, then rinse it with high-pressure
water.