Pris per par

Passar även vår packkälke 001-003.

Pris per par 

Universal

Bredd: 220 mm
Längd: 1160 mm

Dessa belag har varit storsäljare sedan 1991 då man kan konstatera att köregenskaperna förbättras avsevärt, särskilt i svår terräng med djup snö.

Används idag av bl.a försvaret, gränsvakter, renskötare mm.

Plastbelag Kimpex Polaris 3/16" Std Svart

1130 x 203 mm

• Ski covers are 8" wide, giving unbelievable flotation
• Made from 3/16" thick UHMW high-impact plastic
• Protect skis from rocks and gravel and will not stick in wet snow
• Must be drilled to match wear bar being used

Plastbelag BRP Blade

Plastbelag BRP Pilot 6.9, 5.7


Mått: 1220x250x55x6mm

Plastbelag BRP Pilot DS

Plastbelag Lynx/Ski-Doo med snabel.

Passar Lynx med spindel i center, och de flesta Skandic 1999-2004 med stålskida.
Originalmodell med "snabeltopp"

Bredd: 21 cm
Längd: 120 cm

Säljs parvis!

Ersätter originalnummer: 049080 5144415 

Plastbelag Lynx/Ski-Doo 
Passar alla modeller med ADJ-skidan.

Längd: 1130 cm
Bredd: 25 cm

Ersätter originalnummer: 605153964

Bredd 148 mm invändigt på plastbelag, bredd 48 mm på skåran längst ner invändigt i plastbelaget

Längd: 108cm

Plastbelag Ski-Doo 3/16" Std Lila

Passar alla Formula med 139 mm skidbredd

Ersätter originalnummer: 5050428, 5050571, 5050630, 505064500

Plastbelag Ski-Doo 3/16" Std Röd

Passar alla Formula med 139 mm skidbredd

Ersätter originalnummer: 5050428, 5050571, 5050630, 505064500

Plastbelag Ski-Doo 3/16" Std Svart

990 x 152 mm

• Made from 20,6 mm (3/16”) thick polyethylene plastic

• Molded for a perfect fit; all Sno-Stuff Ski Skins are checked on a ski before being packaged

• Provide custom looks, prevent ice and snow from sticking or freezing to skis,

extend the life of the ski, increase fuel economy and improve performance

• Same width as ski for minimal weight and friction

• Drilled for stock wear bar use (Polaris may require drilling one hole)

• Sold in pairs

Plastbelag Ski-Doo 3/16" Std Svart

1080 x 149 mm

• Made from 20,6 mm (3/16”) thick polyethylene plastic

• Molded for a perfect fit; all Sno-Stuff Ski Skins are checked on a ski before being packaged

• Provide custom looks, prevent ice and snow from sticking or freezing to skis,

extend the life of the ski, increase fuel economy and improve performance

• Same width as ski for minimal weight and friction

• Drilled for stock wear bar use (Polaris may require drilling one hole)

• Sold in pairs

Plastbelag Ski-Doo 3/16" Std Svart

1105x127mm

• Made from 20,6 mm (3/16”) thick polyethylene plastic

• Molded for a perfect fit; all Sno-Stuff Ski Skins are checked on a ski before being packaged

• Provide custom looks, prevent ice and snow from sticking or freezing to skis,

extend the life of the ski, increase fuel economy and improve performance

• Same width as ski for minimal weight and friction

• Drilled for stock wear bar use (Polaris may require drilling one hole)

• Sold in pairs

Plastbelag Universal Std Svart

1090 x 152 mm

• An inexpensive way to keep carbides sharp

• Protect skis and save trailer beds, garage floors

and loading ramps from carbide damage

• Design allows sled to be pulled backward

without boots catching on trailer

• Universal 152 mm (6”) size fits most skis, even those with ski skins

• Easy to install and remove

• For trailer use and storage